Production Operator – Rework | 40HRS

Production Operator – Rework

Work Location: Newark, California 94560

Job type: Full-Time

Posted: 06-03-2024

Salary: $25 - $30 USD / Hourly

Email: van@40hrs.us

Job Responsibilities

1. Perform Touch-up Rework tasks:

  • Hand solder & Touch-up Rework for SMT (Surface Mount Technology) & Through-hole (including BGA and ICs) components and Jumper wire,
  • Remove/install components as per IPC-A-610,
  • Touch up solder joints & trimming leads,
  • Clean PCBs (Print Circuit Board), cleans workpieces, using chemical solutions, files, wire brush,
  • Perform rework based on the ECO, Process Deviation, and MPI instruction using a specific type of solder or Flux (Leaded/RoHS clean or no clean process),
  • Install and hand solder all 2nd ops. & SMT parts/components as required per MPI, deviation, and unique rework processes.

 2. Execute written/verbal instructions given by supervisor and monitor efficiency and quality of assigned routine tasks:

  • Check and inspect task results against predetermined standards,
  • Communicate all issues found during hand soldering to the Production Leader.

 3. Provide team support:

  • Demonstrate work methods to new hires,
  • Share best practices, assist in minor troubleshooting,
  • Actively participate in cross-training.

 

Job Requirements

  • Prior on the job 3-5 years or more practical manufacturing experience,
  • User knowledge of ESD, Board handling, and Safety Practices including Personal Protective Equipment,
  • User knowledge of components and their polarity, including resistors and capacitors,
  • User knowledge of IPC-610 and J-STD-001 Soldering Standards,
  • User Knowledge of latest revision-class 3 workmanship criteria is a plus.

 

SUBMIT RESUME

Just fill out the short form below. Thank you!

(3MB upload size limit)

Refer friend

Please fill all field in below refer to friend